Rail sections are sold in 20 ft. lengths to offer the fewest number of joints on longer runs. The rail is field trimmable. Easy to install bottom infill and end caps give the railing a clean, finished look. Infill and caps are sold separately.
Series 200 Rectangular wide top. Perfect for your favorite beverage.
Series 400 Rail cap to attach you own wood or composite railing.
Series 600 The newel post look. Smaller profile allows for installation between posts.
Series 700 Optional bottom rail. Sold in sections of 20ft. Bottom Infill Plates
Item# 0110 - For Series 200 rail.
Item# 0111 - For Series 600 rail and Series 700 Bottom rail.
Rail End Caps
Item# 0112 - Flush end cap for Series 200 rail.
Item# 0113 - End cap for Series 200 rail to terminate rail into a wall.
Item# 0114 - Flush end cap for Series 600 rail
Rail Splices to join sections of Series 200 rail
Item# 0115 - Straight splice
Item# 0116 - 90-degree splice
Item# 0117 - Stair splice
Painted Screws (100pk) (Item# 0910) - 3⁄4′′ Screw to attach railing to post and used to attach splices on aluminum railing systems
Touch Up (Item# 0911) - For use on Black railing parts
Rail Connector Block (RCB) Item# 0118 Used to connect rail to post on Series 600 rail and Series 700 Bottom Rail
Internal Post Reinforcement (Item# 0411) and (Item# 0413) Used to add strength to aluminum post for cable tensioning.
Item# 0413 - 32′′ brace. Included in all drilled post. Order for undrilled post.
Item# 0411 - 10′′ brace. Included in fascia / flush drilled post. Order for undrilled post when flush mounting.
Post and Post Accessories
Our posts are designed specifically for the 224 series cable. The posts measure 2-3/8" and are available pre-drilled or undrilled. Pre-drilled posts are drilled with 10 holes at 3-3/16′′ on center to achieve a 36" rail height. All post kits include necessary bolt caps and washers. All drilled end post kits include internal post reinforcements. Mounting lags sold separate.
Surface Mount Post Kit - Includes with 5" base plate Bottom Infill Plates
Item# 362SE (34-7/8"), Predrilled end post for 200 / 400 rail.
Item# 362SI (34-7/8"), Predrilled intermediate post for 200 / 400 rail.
Item# 366SE (36-3/8"), Predrilled end post for 600 rail.
Item# 366SI (36-3/8"), Predrilled intermediate post for 600 rail.
Fascia Mount Post Kit - For use on fascia or flush mount installations. Bracket kits sold separately.
Item# 362FE (46-3/8"), Predrilled end post for 200 / 400 rail.
Item# 362FI (46-3/8"), Predrilled intermediate post for 200 / 400 rail.
Item# 366FE (46-3/8"), Predrilled end post for 600 series rail.
Item# 366FI (46-3/8"), Predrilled intermediate post for 600 series rail.
Undrilled Post Kit - Due to the variables involved in stair applications,
an undrilled post should be used and field drilled to achieve the appropriate
hole placement for all stair installations. All accessories, other than bolt caps
and washers, are sold separately.
Item# 426UN, Measures 51" for universal use and stairs.
Post Cap (Item# 0410), Use to cap top of post on Series 600 installations and bottom of post on fascia mounts.
Post Fitting (Item# 0412), Use to make a continuous run of Series 600 rail over the post
Fascia Mount Kit (Item# 0415), Provides a 1′′ offset from fascia. Includes screws to attach bracket to post.
Double Corner Fascia Kit (Item# 0416), Provides a 1′′ offset from fascia. Designed to maintain proper alignment in double corner post applications. Includes screws to attach bracket to post.
Base Plate Kit (Item# 0414), Use for surface mounting on undrilled post. Included with drilled surface mount post.
Stainless Steel Lag Bolts
- 4pk 5′′ Wood Lag Kit for Fascia / Surface Mount (Item# 0417)
- 2pk 7′′ Wood Lag Kit for Flush Mount (Item# 0419)
- 4pk 3-3/4′′ Concrete Lag Kit for Fascia / Surface Mount (Item# 0418)
- 2pk 6-1/2′′ Concrete Lag Kit for Flush Mount (Item# 0420)